Ascent Label Anything Zebra Printer Setup App

Overview:

This document describes the initial setup of the Zebra printer for use with Ascent Label Anything utilizing the Ascent Printer Setup app.

Requirements: This application must be installed for Ascent Label Anything to connect to your Zebra Printers.

1. A device with Windows Operating System installed
2. Zebra Printers
3. Ascent Printer Setup App installed 

Setup:

• Install the Ascent Printer Setup Application
  • Printer Setup App
• Then click on the “Download” button

• Proceed with the download by clicking the “Download anyway” button

• Double click the Application
  • Warning Screen Appears

• Click More info
• Click Run Anyway

Printer(s) not connected to the Network:

• Make Sure your Printer has Wi-Fi capabilities
• Make sure your Printer is Plugged into your PC with a USB cord
• Select the “USB” Option
• Select your Printer from the drop-down list
  • Note: Only Zebra Printers will work

• Click the “Connect to Wifi” button

• Type In your Network Information (SSID is your network name)

• Click “Submit”
  • The Printer will start to reboot
• Once the printer has reset, click “Link Printer to Ascent”

Printer(s) Already Connected to the Network:

• Click the “Network” Option
• Enter your printer(s) IP address 
  • If your printer does not have an LCD screen, you can find this by holding the feed and cancel buttons on the top panel
• Past IP Addresses in the field
• Click “Link Printer to Ascent”

Adding Printer(s) to Salesforce:

• Go to the home screen in Salesforce and search for “Cloud Printers” 

• Click New
  • ‘Cloud Printer Name’ = An identifiable name for the printer
  • ‘Printer ID’ = The printer’s Serial Number
• Click “Save”

You have successfully set up your Zebra Printer(s) with Ascent Label Anything!